CG Consultants http://95.131.68.161/~cgconsul/ Thu, 23 Feb 2012 03:13:02 Wed, 22 Feb 2012 12:01:41 JK108289 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/commissioning-engineer-service-engineer/ Nationwide Commissioning Engineer / Service Engineer My client specialises in the design and supply of process systems for the oil and gas industry. Systems supplied include those for crude oil and produced water treatment, water injection, gas dehydration and hydrogen generation and purification. They are seeking a direct and “hands on” Commissioning Engineer / Service Engineer to provide specialist on site services worldwide. This will include installation, commissioning, testing, troubleshooting, servicing and operational support in both onshore and offshore environments. Permanent Tue, 21 Feb 2012 16:50:33 JPC108288 http://www.cgconsultants.com/telecommunications-and-datacommunications-jobs/test-technician-%e2%80%93-rf-microwave-test-prototype-test-technician/ South Coast Test Technician – RF Microwave Test / Prototype Test Technician My client is leading innovator in RF amplifiers for use in commercial, defence and scientific sectors to increase the capability of their high-speed internet telecommunications. They are seeking a Test Technician with experience working in a Production Test Environment with a good knowledge of testing PCB assemblies ideally coupled with a solid understanding of RF microwave module assemblies Permanent Mon, 20 Feb 2012 15:22:51 CP108286 http://www.cgconsultants.com/defence-military-jobs/test-engineer-analogue-and-digital/ Bournemouth Test Engineer – Analogue & Digital The Test Engineer will be required to perform low and high voltage electronic or electro-mechanical testing on equipment, assemblies and systems. The test department works within the Manufacturing department so the work will include new build products and components prior to dispatch the Test Engineer will also be required to test and repair incoming faulty goods. Contract Mon, 20 Feb 2012 13:29:12 SB108287 http://www.cgconsultants.com/aerospace-jobs/electrical-manufacturing-engineer-sap/ South West Electrical Manufacturing Engineer (SAP) • We are looking for Electrical Manufacturing Engineers who have experience in the aerospace industry, the candidate must be able to manage individual tasks and follow a new project from start to finish. The company specialise in composite wing production and need an enthusiastic aerospace professional. The ideal candidate will have SAP planning skills alongside a good shop floor background. Contract Fri, 17 Feb 2012 12:30:08 JK108188 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/process-engineer-oil-and-gasprocess/ Coventry Process Engineer (Oil and Gas/Process) My client is a global Process Systems company who specialises in the design, production and supply of process equipment for the Oil & Gas and Water industries. Systems supplied include those for crude oil, produced water treatment, water injection, gas dehydration and hydrogen generation and purification. They supply steel frame mounted process units comprising pressure vessels and proprietary internals interconnected with pipe work, valves, instruments and controls. The package units are usually supplied to subcontractors as a ‘plug in’ unit at their refinery or offshore site. They are urgently seeking Process Engineers to prepare process designs for all aspects of project life cycle including FEED, budget and detailed process designs during sales tendering process through to project completion. Provide commissioning and post commissioning process design support to Aftermarket. Permanent Thu, 16 Feb 2012 11:44:10 KC108280 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/storesperson-storesman/ Lincoln Storesperson / Storesman Our client are a large engineering and manufacturing company based in Lincoln and are looking for an experienced store person with a counterbalance forklift truck licence. Contract Tue, 14 Feb 2012 17:05:46 JK108283 http://www.cgconsultants.com/defence-military-jobs/sqe-supplier-quality-engineer/ Bournemouth SQE Supplier Quality Engineer The role is to provide day to day management of sub-contract / supplier activities and ensure levels of QA are upheld in the supply chain. The role will involve Supplier Management, supplier approval visits, audits and monitoring. Relevant experience in supply chain / quality environments within a manufacturing environment will be required. Contract Tue, 14 Feb 2012 16:41:30 MB108284 http://www.cgconsultants.com/aerospace-jobs/cnc-machinist-cnc-operator/ Lincolnshire CNC Machinist / CNC Operator My client is looking for a number of skilled CNC Machinists / Operators on a long term contract basis. The ideal candidate will have good milling, turning, grinding and setting experience working on 3, 4, 5 axis machines. My client manufacture aerospace engine parts and are based in the Lincoln area. Contract Tue, 14 Feb 2012 15:52:20 PHP108282 http://www.cgconsultants.com/defence-military-jobs/electrical-wireman-wiring-technician-wirer-2/ Bournemouth Electrical Wireman / Wiring Technician / Wirer Electrical Wireman / Wiring Technician / Wirer with a client in the Dorset area. Excellent packages with good benefits packages available. Contract Tue, 14 Feb 2012 15:02:19 AM108281 http://www.cgconsultants.com/pharmaceutical-scientific-and-semiconductor-jobs/pro-engineer-wildfire-pro-e-mechanical-design-engineer/ Cambridge Pro-Engineer Wildfire / Pro-E Mechanical Design Engineer Mechanical / Electro-Mechanical Design Engineers required for our client in the Cambridge area. Candidates must be fully familiar with the Pro Engineer Wildfire CAD package. The candidate will be able to turn concepts into reality with design management, creating Bills of Materials (BOM's) using the information from the MRP system to design complex electro-mechanical equipment. Contract Tue, 14 Feb 2012 14:27:46 PH108279 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/product-development-engineer-filtration-systems/ Basingstoke, Hampshire Product Development Engineer (Filtration systems) • To develop gas turbine filtration technologies for the future. Ownership and timely delivery of the engineering and technical solution for new filtration products Location: Basingstoke, Hampshire Permanent Tue, 14 Feb 2012 13:56:20 MB108215 http://www.cgconsultants.com/information-technology-jobs/software-developerengineer/ Aldershot, Tongham, Guildford, Farnham, Farnborough, Fleet, Alton Software Developer/Engineer I am looking for a talented and experienced Software Developer/Engineer with excellent C#.net and ASP.net MVC exposure. My client is a leader in the aviation and travel industry. Location: Aldershot, Tongham, Guildford, Farnham, Farnborough, Fleet, Alton Contract Mon, 13 Feb 2012 17:02:43 KC108271 http://www.cgconsultants.com/aerospace-jobs/quality-engineer/ Bristol Quality Engineer Our client is a large aerospace company who are looking to recruit a quality engineer on an initial 6 month contract to join their team. The successful candidate will be working in a manufacturing environment and must be a SAP user. Contract Mon, 13 Feb 2012 16:48:01 MB108272 http://www.cgconsultants.com/aerospace-jobs/manufacturing-engineer-sap-composites/ South West and North West Manufacturing Engineer (SAP & Composites) • We are looking for Manufacturing Engineers who have experience in the aerospace industry, the candidate must be able to manage individual tasks and follow a new project from start to finish. The company specialise in composite wing production and need an enthusiastic aerospace professional. The ideal candidate will have SAP planning skills alongside a good shop floor background. Contract Mon, 13 Feb 2012 15:29:34 CP108278 http://www.cgconsultants.com/aerospace-jobs/senior-process-engineer-oil-gasprocesswater-2/ Guildford, Camberley, Woking, Farnborough, Reading, London, Windsor Senior Process Engineer (Oil & Gas/Process/Water) My client are a leading company operating internationally in the oil and gas sector, applying a unique blend of expertise, technology and facilities to embrace all aspects of produced water treatment and oil and gas separation. They are urgently seeking a Senior Process Engineer to join their rapidly expanding team. The Senior Process Engineer will take responsibility for all process engineering activities within the company. This will require key decision making skills and the ability to communicate process information to relevant internal and external parties. The role will also encompass a project engineering role that will involve managing projects from process review to implementation. The position will suit a well motivated individual who enjoys working in a small interactive team in a role that involves both practical and technical competency. Location: Guildford, Camberley, Woking, Farnborough, Reading, London, Windsor. Contract Mon, 13 Feb 2012 15:15:23 CP108231 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/mechanical-engineer-%e2%80%93-oil-gas/ Warwickshire, Rugby Mechanical Engineer – Oil & Gas My client is a global Process Systems company who specialises in the design, production and supply of process equipment for the Oil & Gas and Water industries. Systems supplied include those for crude oil, produced water treatment, water injection, gas dehydration and hydrogen generation and purification. They supply steel frame mounted process units comprising pressure vessels and proprietary internals interconnected with pipe work, valves, instruments and controls. The package units are usually supplied to subcontractors as a ‘plug in’ unit at their refinery or offshore site. We are currently recruiting for Mechanical Engineers to work for a world leader in the Oil & Gas sector. The Mechanical Engineer will be required to review mechanical specifications, design drawings for vessels, pumps, compressors, valves and various other equipment. The Mechanical Engineer will also be required to evaluate vendor quotes and review documentation and ensure the correct approval is received by all engineering teams. A large part of the role will also be to produce mechanical data sheets, specifications, schedules and equipment requisitions. Location: Warwickshire, Rugby Contract Mon, 13 Feb 2012 15:10:22 TC108274 http://www.cgconsultants.com/information-technology-jobs/application-support-development-engineer/ Warwick Application Support Development Engineer My client is urgently seeking an Application Support Development Engineer to join the Service Desk. The Application Support Development Engineer will require strong troubleshooting, problem solving, and development skills to deliver high quality 2nd and 3rd line support to the business and customer. The Application Support Development Engineer will be offering support for the Microsoft Dynamics Suite and related third party solutions. Permanent Fri, 10 Feb 2012 17:18:56 RJ108222 http://www.cgconsultants.com/information-technology-jobs/1st-line-support-engineer/ Guildford 1st Line Support Engineer 1st Line Support Engineer, Focussing on supporting our client’s own proprietary database software products across various sites. In particular support of informational databases, Crystal Reports and Oracle Database for operational systems. This role is supporting operational bespoke software, not hardware. Permanent Fri, 10 Feb 2012 12:41:34 PHP108273 http://www.cgconsultants.com/information-technology-jobs/1st-and-2nd-line-support-service-desk-analyst/ Stafford 1st and 2nd Line Support / Service Desk Analyst Our client is looking for a 1st and 2nd Line Support / Customer Service Agent to provide 1st and 2nd Level/Line call logging support to over 450 users within the UK & across Europe, logging and escalating calls to IT Service Desk Analysts where appropriate. The candidate will have experience dealing with inbound calls; will have excellent communication and customer service skills. Looking for a candidate who is capable and confident working as both 1st and 2nd line support, being prepared to help clients face to face where appropriate. Permanent Fri, 10 Feb 2012 11:45:34 PHP108208 http://www.cgconsultants.com/aerospace-jobs/principal-systems-engineer/ Leicester Principal Systems Engineer We are currently looking for an experienced Systems Engineer with in-depth knowledge of aero control systems. As a systems engineer you will work closely with the world’s leading aero engine manufacturers to develop, maintain and troubleshoot FADEC or similar safety critical systems. This is a good opportunity for a systems engineer to be part of a rapidly growing client who are looking for a candidate who wants to develop and grow with the company. My client is based in Leicester and is a leading manufacturer of parts for the aerospace industry. Permanent Fri, 10 Feb 2012 11:27:19 PHP108228 http://www.cgconsultants.com/defence-military-jobs/cnc-machinist-%e2%80%93-setter-operator/ Blackburn CNC Machinist – Setter Operator A great opportunity to work as a machinist/setter operator with a leading engineering, fabrication and machining company. As a machinist/setter operator you will be responsible for producing work to very tight tolerances for a variety of end markets including defence, aerospace, mining, oil and gas etc. Must have at least 2 years experience as a machinist/setter operator working on Mazak machines and ability to work to and read engineering drawings. Contract Thu, 09 Feb 2012 12:37:56 http://www.cgconsultants.com/news/hitachi-income-badly-hit-in-q4/ Hitachi, the large Japanese conglomerate, where a reasonable segment of its sales and profits are achieved from the IT and telecom industries, has faced up to the brunt of profit results in the third quarter of the fiscal year, ending December 2011. Sales for the quarter were mainly flat at 2,2665bn [...] Thu, 09 Feb 2012 10:45:16 RJREC-ITM http://www.cgconsultants.com/vacancies-cg-consultants-jobs/it-recruitment-manager/ Camberley IT Recruitment Manager · Are you are already an experienced IT Recruiter and looking to take your next step into IT Recruitment Management? · Perhaps you are an experienced IT Recruitment Manager and looking for a new challenge, extra rewards, autonomy and to build a fresh team with your own stamp? If you want to make a move to a company that has already been established for 35 years, has doubled its profits / turnover in the last 12 months, and is growing significantly then get in touch!! Location: Camberley Permanent Thu, 09 Feb 2012 10:33:32 PHAMCG1 http://www.cgconsultants.com/vacancies-cg-consultants-jobs/recruitment-resourcer/ Camberley Recruitment Resourcer Due to our continued success year on year (having doubled profit/turnover in the last 12 months) we are rapidly expanding! CG Consultants are looking to recruit a number of Technical / Engineering / IT Recruitment Resourcers to provide additional manpower to their contract / temporary and permanent recruitment teams. Full training is provided with opportunities for progression within the company Working in an open planned team environment, we encourage teamwork and a welcoming family like atmosphere. We are based in Camberley. Permanent Thu, 09 Feb 2012 09:58:32 JPC108270 http://www.cgconsultants.com/aerospace-jobs/principal-design-engineer-%e2%80%93-aerospace/ Hinckley Principal Design Engineer – Aerospace My client is a world leader in aerospace engine design and manufacture and they are currently seeking a Principal Design Engineer to join their rapidly growing design department. The ideal candidate will have a strong background in aerospace design with as well as a good understanding of engineering principles and manufacturing techniques. You should also have technical experience in a variety of the following areas solid mechanics and dynamics, metallic materials design and selection, rotating machinery, externals and conceptual layouts. The Design Engineer will also have experience of 3D modelling and have worked with design tools such as NX (Unigraphics), Catia V5 or ProE Permanent Tue, 07 Feb 2012 15:51:41 CP108267 http://www.cgconsultants.com/aerospace-jobs/manufacturing-engineer-2/ Dunstable Manufacturing Engineer - Medium-high volume Aerospace manufacturing environment My client a world leading Aerospace manufacturer and is currently seeking a Manufacturing Engineer on a contract basis for engineering projects focused on scrap reduction, new production introduction and manufacturing process improvement within the factory whilst implementing standardisation’s. The candidate will have experience working in a lean manufacturing environment and will have experience of structured problem solving in a medium-high volume manufacturing environment with extensive knowledge of 5S and SOP’s (Standard Operating Procedures). Contract Mon, 06 Feb 2012 11:44:50 JK108192 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/applicationsproposals-engineer-processoil-gas-2/ Guildford Applications/Proposals Engineer (Process/Oil & Gas) My client is a leading company operating globally in the Oil & Gas sector. They supply produced water treatment and oil and gas separation equipment and are urgently seeking an Applications engineer to undergo a mix of Proposals and Project engineering duties. This role will attract someone who will enjoy a challenge, providing all aspects of Proposal preparation and support with Project Engineering preferably with a Mechanical bias to ensure the successful acquisition and implementation of multiple projects to meet demanding schedule requirements whilst maintaining the highest quality standards. The person will take responsibility for preparing detailed proposals for various work scopes as well as supporting the project team where necessary to allow the achievement of the business’s stated aims and objectives. Permanent Mon, 06 Feb 2012 11:21:05 JPC107956 http://www.cgconsultants.com/defence-military-jobs/materials-planner-buyer-%e2%80%93-mechanical-electronic-electro-mechanic/ Bournemouth Materials Planner / Buyer – Mechanical / Electronic / Electro Mechanical My client is a world leader in the Defence, Nuclear and Electronics industry. They are urgently seeking a Materials Buyer / Planner from an engineering / manufacturing background with significant experience in a materials planning / buying role within a mechanical /electronics environment. The ideal candidate will have a strong technical background in engineering gained through an apprenticeship or hands on experience coupled with a good understanding of electronic /mechanical components and manufacturing processes. Permanent Mon, 06 Feb 2012 11:17:28 JPC108182 http://www.cgconsultants.com/aerospace-jobs/2-xci-technician-instrument-technician-nuclear/ Kent 2 XC&I Technician / Instrument Technician (Nuclear) Our client in the Nuclear Industry is going to require 2 Time served / apprentice trained control and instrument technicians with a solid background and experience within instrumentation and control calibration, for initial 5 month contracts in Kent starting January 2012. Candidates must be security cleared or willing to obtain clearance for Nuclear sites through CG Consultants, have a CCNSG safety passport (or be willing to obtain one) and be flexible and willing to work UK wide. Contract Fri, 03 Feb 2012 16:27:30 MB108263 http://www.cgconsultants.com/aerospace-jobs/senior-manufacturing-engineer-5-axis-nc-programming/ Lincolnshire Senior Manufacturing Engineer (5 axis NC Programming) My client is a large manufacturer of critical rotating parts for the aerospace industry. The ideal candidate will have experience working with aerofoils/turbine blades and rotatives and have the ability to programming the NC machining. Contract Thu, 02 Feb 2012 16:04:23 CP108251 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/manufacturing-engineer/ Lincoln Manufacturing Engineer Our client is currently recruiting for a Manufacturing Engineer with knowledge of layouts and routings for a manufacturing facility. The role will be to support current machinery and equipment and provide support and instruction to the shop floor team. This is a general manufacturing role to provide layouts and routing to ensure a smooth and efficient manufacturing process. The ideal candidate will be from an Aerospace or Gas Turbine background. Contract Wed, 01 Feb 2012 10:56:36 MB108260 http://www.cgconsultants.com/information-technology-jobs/infrastructure-engineer-x-2-data-centre-migration/ Hampshire – Basingstoke, Reading, Alton, Tongham, Aldershot, Hook 2 x Infrastructure Engineer (Data Migration Project) My client is looking for 2 Infrastructure Engineers to carry out a large Data Centre Migration project. The ideal candidates will be experienced with Windows 2003/8 (AD and server), Citrix Xenapp (5.0-6.5), VMware ESX (4.0-5.0) and Xenserver. It is an urgent requirement for 2 people to come in and successfully complete the migration. Lots of hours available for 3 months Windows 2003/8 (AD and server), Citrix Xenapp (5.0-6.5), VMware ESX (4.0-5.0) Xenserver. Location: Hampshire – Basingstoke, Reading, Alton, Tongham, Aldershot, Hook Contract Wed, 01 Feb 2012 10:07:35 PH108259 http://www.cgconsultants.com/automotive-and-rail-jobs/electronics-engineer-motorsport/ Surrey Electronics Engineer - Motorsport Our client is a world leader in Motorsport engineering and looking for an Electronics Engineer to join their team. The successful candidate would be responsible for designing and developing the Electronics for the wind tunnel model motion and data acquisition systems. Permanent Tue, 31 Jan 2012 14:21:14 http://www.cgconsultants.com/news/a-bad-dream-for-nokia-no-place-for-a-third-ecosystem/   The story that recently circulated about Microsoft buying Nokia, forced Nokia to embarrassingly deny the rumours that it was preparing to sell up. The idea of Microsoft purchasing a hardware company and breaking up its licensing business has become a lot less unconventional since the acquisition by Google of Motorola’s phone business. It might be [...] Tue, 31 Jan 2012 11:24:35 RJ108257 http://www.cgconsultants.com/information-technology-jobs/net-developer-vbnet-aspnet-c-xml-sql/ Reading, Berkshire .NET Developer (VB.NET, ASP.NET, C#, XML, SQL) My client is looking for a .NET developer, predominantly VB.Net, to work for a rapidly expanding development team in an exciting, vibrant, dynamic, fast paced marketing company in Reading. Experience of VB.NET with either ASP.NET or C# experience is required. Also good XML and SQL Server exposure is important. Permanent Tue, 31 Jan 2012 11:06:08 JK108258 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/project-engineer-oil-gasprocess/ Colchester Project Engineer (Oil & Gas/Process) My client is global Oil & Gas company who design and supply filtration and separation equipment globally to the Oil & Gas, Petro-chemical and Power industries. They are urgently seeking Project Engineers to work on projects from inital concept to final handover. The Project Engineer should have Process Engineering experience with experience in Process Design. Permanent Mon, 30 Jan 2012 16:49:54 JPC108255 http://www.cgconsultants.com/power-generation-nuclear-and-renewable-energy-jobs/project-engineer-%e2%80%93-materials-engineering-composites/ South Coast Project Engineer – Materials Engineering / Composites Our client is a world leader in the manufacture of composite materials predominately for use in the wind energy, marine, rail and automotive sectors. They are seeking a Project Engineer with a strong knowledge of materials science and composites. The candidate will be degree qualified in materials science or similar and have a good understanding of the properties, manufacture and testing of composite materials. As a Project Engineer, you will be responsible for liaising with manufacturing, purchasing and logistics to ensure the project is on time and within budget. You will also be responsible for testing materials as well as facilitating the change management process. Qualification of the project and customer requirements will also fall under the duties of the project engineer. Location: South Coast – Bournemouth, Poole, Isle of Wight, Southampton, Portsmouth Permanent Mon, 30 Jan 2012 16:23:44 CP108256 http://www.cgconsultants.com/power-generation-nuclear-and-renewable-energy-jobs/technical-sales-manager-account-manager/ South Coast, Portsmouth, Bournemouth, Isle of Wight, Southampton Technical Sales Manager / Account Manager We are looking for an experienced Technical Sales/Account Manager. The duties of the role are to develop and maintain relationships with key customers and influencers. The candidate must have either technical or engineering experience with solid business development skills. The role will require a good knowledge of Composites used in wind energy and a good all round technical knowledge. Location: South Coast, Portsmouth, Bournemouth, Isle of Wight, Southampton Permanent Mon, 30 Jan 2012 09:04:25 AM108254 http://www.cgconsultants.com/defence-military-jobs/electrical-wireman-wiring-technician-wirer/ Bournemouth Electrical Wireman / Wiring Technician / Wirer Electrical Wireman / Wiring Technician / Wirer with a client in the Dorset area. Excellent packages with good benefits packages available Location: Bournemouth/ Additional Locations: Poole, Christchurch, Dorset, New Forest Permanent Fri, 27 Jan 2012 08:59:59 PHP108252 http://www.cgconsultants.com/aerospace-jobs/stress-engineer/ Leicester Stress Engineer An opportunity to join a progressive aerospace engineering company with a 5-year strategic expansion plan. Looking for high calibre, experienced stress analysts / mechanical integrity engineers to work on gas turbine components and aero structures. As a stress engineer within this client you will provide analytical expertise and Finite Element Analysis (FEA) including linear and advanced non linear methods. Location: Leicester Contract Tue, 24 Jan 2012 17:28:42 MB108250 http://www.cgconsultants.com/aerospace-jobs/quality-inspectors-aerospace/ Rugby Quality Inspectors (Aerospace) My client is a leader in the Aerospace sector and is looking for Quality Inspectors. The candidate will ideally have extensive Aerospace or Automotive experience and must have significant Dimensional / Visual inspecting / inspection knowledge. We are looking for a couple Inspectors that must have Inspecting experience. Contract Tue, 24 Jan 2012 15:32:33 MB108248 http://www.cgconsultants.com/automotive-and-rail-jobs/composite-technician-trimmer%e2%80%93-automotive-motorsport/ Bicester Composite Technician (Trimmer)– Automotive / Motorsport My client is a world leader in performance engineering within the motorsport industry. They are currently seeking experienced Composite Technicians /Trimmers to conduct various composite engineering task including laminating, trimming, cutting and fitting. The ideal candidate will have a strong background in the automotive industry preferably performance engineering. Contract Tue, 24 Jan 2012 15:28:24 RJREC-TR http://www.cgconsultants.com/vacancies-cg-consultants-jobs/trainee-recruitment-consultant/ Camberley Trainee Recruitment Consultant Location; Camberley Permanent Tue, 24 Jan 2012 15:20:37 RJREC-RC http://www.cgconsultants.com/vacancies-cg-consultants-jobs/recruitment-consultant-senior-recruitment-consultant/ Camberley, Surrey Recruitment Consultant / Senior Recruitment Consultant Location: Camberley Permanent Tue, 24 Jan 2012 13:15:25 CP108246 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/senior-metallurgist/ Lincoln Senior Metallurgist Working in a busy metallurgical laboratory providing expert materials advice and root cause analysis to ensure the reliability of products. The Senior Metallurgist will be required to provide, maintain and develop expert knowledge in the areas of material properties, mainly component degradation and failure analysis techniques. Permanent Tue, 24 Jan 2012 09:55:33 JK108103 http://www.cgconsultants.com/automotive-and-rail-jobs/ride-and-dynamic-modelling-engineer-f1motorsportresearch-and-development/ Woking Ride and Dynamics Modelling Engineer (F1/Motorsport/Research and Development) My client is a world class racing team looking for a 1st class Ride and Dynamic Modelling Engineer. You will be required to develop advanced vehicle dynamics simulation and analysis tools and use them in the optimisation of car performance. The focus of the role is on understanding and improving the dynamic aspect of cars behaviour. Someone from a Research and Development would be ideal Permanent Tue, 24 Jan 2012 09:36:22 JK108191 http://www.cgconsultants.com/aerospace-jobs/senior-process-engineer-oil-gasprocesswater/ Guildford Senior Process Engineer (Oil & Gas/Process/Water) My client are a leading company operating internationally in the oil and gas sector, applying a unique blend of expertise, technology and facilities to embrace all aspects of produced water treatment and oil and gas separation. They are urgently seeking a Senior Process Engineer to join their rapidly expanding team. This role is for a degree qualified process engineer with 5+ years relevant industry experience. The Senior Process Engineer will take responsibility for all process engineering activities within the company. This will require key decision making skills and the ability to communicate process information to relevant internal and external parties. The role will also encompass a project engineering role that will involve managing projects from process review to implementation. The position will suit a well motivated individual who enjoys working in a small interactive team in a role that involves both practical and technical competency. Permanent Tue, 24 Jan 2012 09:28:23 JK108205 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/regional-sales-manager-oil-gasprocess/ Guildford Regional Sales Manager (Oil & Gas/Process) My client are a leading company operating internationally in the oil and gas sector, applying a unique blend of expertise, technology and facilities to embrace all aspects of produced water treatment and oil and gas separation. They are urgently seeking a Regional Sales Manager to join their rapidly expanding team. The Regional Sales Manager will be responsible for implementing and managing the company’s sales strategy and business objectives for the selected markets to ensure achievements of company sales goals and profitability. Permanent Tue, 24 Jan 2012 09:19:43 JK108192 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/applicationsproposals-engineer-processoil-gas/ Guildford Applications/Proposals Engineer (Process/Oil & Gas) My client is a leading company operating globally in the Oil & Gas sector. They supply produced water treatment and oil and gas separation equipment and are urgently seeking an Applications engineer to undergo a mix of Proposals and Project engineering duties. This role will attract someone who will enjoy a challenge, providing all aspects of Proposal preparation and support with Project Engineering preferably with a Mechanical bias to ensure the successful acquisition and implementation of multiple projects to meet demanding schedule requirements whilst maintaining the highest quality standards. The person will take responsibility for preparing detailed proposals for various work scopes as well as supporting the project team where necessary to allow the achievement of the business’s stated aims and objectives. Permanent Mon, 23 Jan 2012 16:10:23 PHP108244 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/mechanical-tester-stress-technician/ Lincolnshire Mechanical Tester / Stress Technician Our client is a world leader in the Oil & Gas industry. They are looking for a mechanical tester / stress technician who will be capable of cyclic testing using Instron servo hydraulic testing frames and vibrophore testing frames. This global client offers a fantastic opportunity to develop your skills and career. As a mechanical tester / stress technician you will also be required to provide specialist mechanical testing support for the gathering of critical component materials properties. A strong understanding of LCF and HCF testing would also be desirable. Contract Mon, 23 Jan 2012 15:30:47 CP108245 http://www.cgconsultants.com/water-oil-gas-petrochem-jobs/metallurgist/ Lincoln Metallurgist We are currently recruiting for an experienced Metallurgist to work for our client based in Lincoln. The ideal candidate will have experience of materials technology/behaviour, manufacturing techniques and importantly the forging and processing of steels and high temperature alloys. The role will be to provide metallurgical support for the engine product range. This will include supporting suppliers, sourcing, quality, manufacturing and engineering. The Metallurgist will be required to have a sound knowledge of the methodologies and forging techniques for a range of alloys, steels and high temperature materials. Contract Mon, 23 Jan 2012 13:09:17 PHP108206 http://www.cgconsultants.com/aerospace-jobs/principle-buyermanufacturing-engineer-manufacturing-experienced/ Leicester Principle Buyer/Manufacturing Engineer (Manufacturing experienced) I am looking for a permanent full-time Buyer/Manufacturing Engineer with a proven track record of procurement in an engineering environment, ideally in the aerospace industry. My client is based in the Leicester area and is looking for someone ASAP. My client would consider an experienced manufacturing engineer with an interest in procurement; however this must be supported by some buying experience. The client is growing rapidly and this is a good opportunity for a Buyer/Manufacturing Engineer to be part of a dynamic company who will look to facilitate your development. Permanent Mon, 23 Jan 2012 12:42:07 PHP108087 http://www.cgconsultants.com/defence-military-jobs/sales-manager-%e2%80%93-nuclear-control-systems/ Bournemouth Sales Manager – Nuclear Control Systems My client is a world leader in safety critical electronic control systems. They are currently seeking an experienced sales manager to promote, market and sell nuclear control systems offerings to prime contractors and customers within the civil nuclear markets. As the sales manager you will also be required to bring in and win orders which are profitable and in line with business aspirations. You will be able to produce and implement successful strategic plans, providing inspiration for the supporting technical team to generate business opportunities, develop opportunities and close deals. Permanent Mon, 23 Jan 2012 12:28:04 CP108197 http://www.cgconsultants.com/defence-military-jobs/inspection-and-release-engineer/ Dorset Inspection and Release Engineer Our client a world leading Defence company are looking for an Inspection and Release Engineer to work at their Dorset site. The role will require taking a lead in the inspection and survey of incoming equipment returned for repair. The Inspection and Release engineer will also be responsible for the final inspection of goods before despatch to customers and also the initial inspection of incoming coded goods. Permanent Mon, 23 Jan 2012 11:26:21 CP108238 http://www.cgconsultants.com/aerospace-jobs/hr-business-partner/ Bristol HR Business Partner An excellent opportunity to work for a world leading Aerospace company based in Bristol. The ideal candidate will have extensive HR experience with a CIPD qualification and preferably experience working in a unionised environment. Contract Sun, 11 Dec 2011 14:19:36 http://www.cgconsultants.com/news/boeing-supports-the-experts-on-biofuel/   An agreement has been signed by Boeing and the CSIRO to decide whether the far north of Australia would be an acceptable location for growing our own jet fuel. According to Boeing, although biofuels have been verified for use in aviation, an increase in production presents a challenge. For instance, the critics have blamed ethanol subsidies [...] Mon, 28 Nov 2011 14:18:11 http://www.cgconsultants.com/news/nokia%e2%80%99s-luxury-phone-brand-to-be-sold/   Vertu, the completely owned luxury phone brand of Nokia which sells basic mobile phones with stylish cases, is planning to go on the market. It has as yet, not been confirmed but it is assumed that Goldman Sachs has been appointed to oversee the sale. This will probably land the UK based Vertu into the [...] Wed, 05 Oct 2011 14:14:31 http://www.cgconsultants.com/news/osi-open-source-is-welcomed-by-microsoft-to-win8-store/   Microsoft is embracing most, but not all, open-source apps into the Windows 8 Windows store. Utilising any open-source licence which has been approved by the Open-Source Initiative (OSI), the Store’s App Developer Agreement permits developers to build their apps for download and installation on Windows 8 machines. The OSI is the organisation that keeps an eye [...] Tue, 13 Sep 2011 14:12:05 http://www.cgconsultants.com/news/oracle-is-being-examined-by-french-regulators-over-the-withdrawal-of-itanium/   The French national competition authority, Autorite de la concurrence, has initiated an enquiry into the decision by Oracle to halt software development for future versions of Intel’s Itanium processor family. The complaint against Oracle was filed with the French authorities by HP in July 2011, soon after the initiation of legal action. In a statement, translated [...] Fri, 12 Aug 2011 15:55:36 http://www.cgconsultants.com/news/spr-chip-could-provide-early-alzheimers-warning/   Clinicians and engineers are building a diagnostic micoarray chip for Alzheimer’s disease that will provide a vital early warning of the condition.   They are hoping to make a handheld or a small desktop device using surface plasmon resonance (SPR) — a relatively new technology — coupled with high-sensitivity complementary metal-oxide semiconductor (CMOS) imaging.   Unlike other detection techniques, [...] Thu, 30 Jun 2011 14:27:28 http://www.cgconsultants.com/news/1029347493/   Engineers are in demand despite looming cuts in the UK that will hit public sector projects hard. But recruiters may have to think differently.   Despite the spectre of public sector cuts as the government implements a £6bn package of savings in the sector this year, demand for engineers is spread over a wide array of sectors [...] Thu, 09 Jun 2011 12:22:18 http://www.cgconsultants.com/news/is-the-uk-losing-its-it-workforce-to-companies-abroad/ More than two-thirds of IT workers are considering or have applied for IT-related jobs outside of the UK, according to findings from The IT Job Board.    Just 32% said that this wasn’t something they were considering.   Seven in 10 said they were considering moving due to the quality of the jobs on offer, 68% said it was [...] Mon, 18 Apr 2011 10:12:15 http://www.cgconsultants.com/news/increase-in-renewable-energy-useage/   The share of renewable energy across the EU’s generation mix has almost doubled over the past decade, from 5.4 per cent to nine per cent between 1999 and 2009, according to new EU Statistics released on 11/4/2011.   The figures, produced by Eurostat at the start of EU sustainable energy week, also show that the proportion of [...] Mon, 07 Mar 2011 18:26:30 http://www.cgconsultants.com/news/mainframe-recovery-strengthens/ It has been a good year for mainframes, according to IDC’s latest server shipment report. Beatriz Valle, senior research analyst in the Enterprise Server group for IDC EMEA. said, “The strength of mainframe recovery in 4Q 2010 was greater than expected, with an increase of 62.6% year on year. “These results were driven by pent-up demand for [...] Sun, 05 Dec 2010 09:54:59 http://www.cgconsultants.com/news/recruitrank-awards/ CG Consultants attended the RecruitRank Awards on Tuesday 9th November, hosted by Jobsite UK. The purpose of the awards is to recognise excellent customer service, as voted by the job seeker, broken down into 5 categories: Communication, Understanding Candidate Needs, Industry Knowledge, Most Improved Recruiter and Best Recruiter. We are proud to announce we acheived a top 10 finalist position in [...] Fri, 05 Nov 2010 13:59:14 http://www.cgconsultants.com/news/our-new-website-is-launched/ The launching of our new website represents the promising expansion of CG Consultants.   In the coming weeks, to cope with the expansion, the permanent team will be moving upstairs to newly refurbished offices, accommodating a new look team under the tutelage and management of Chris Baldwin.   The contract team is continuing its fantastic work with impressive feedback [...]